:format(webp))
A stable EISENHORN Strenght Station is the basis for your efficient and intensive fitness training. In this post, we will guide you step by step through the process - from wall analysis, choosing the right materials to the final installation. We will provide you with practical tips and show you how to achieve your goals. Fitness station S or DS Simply, safely, and securely installed - so that your training is always fun and maximally effective.
Cleverly distributed power - so your IRONHORN fits on any wall.
EISENHORN strenght stations can be securely mounted on almost any wall - even on drywall and wooden walls such as double-planked plasterboard or Fermacell constructions.
This is made possible by the particularly long and rigid aluminum column, which is vertically mounted on the wall. Due to the lever principle, the force applied is distributed along the entire length of the profile - this makes the system act like a mechanical reduction.
In comparison to other devices - for example, a large television with a corresponding wall mount - the load transfer with EISENHORN strenght stations is much gentler on the walls.
The result: Stability on almost any surface with a compact design.
Thoroughly tested - maximum security on every wall
The EISENHORN strenght station offers an impressively high safety margin. In elaborate standard tests, the system is tested with loads of over 400 kg - on different wall surfaces such as concrete, brick, aerated concrete, and lightweight walls.
Special attention is paid to the so-called blocker — a locking mechanism that allows the device to be completely secured, for example, during pull-ups. Since blocked exercises subject the device to static forces, the current EN standard requires higher safety margins in these cases. Therefore, the use of the blocker is recommended for body weights up to 100 kg; for the EISENHORN DS, the clearance is correspondingly higher.
For all other exercises, where the device is not blocked (e.g., pulling exercises), the user’s weight does not matter. The construction remains stable, safe, and reliable in all situations.
Can I assemble my power station by myself?
Yes, that's exactly why we have continuously developed and designed our power stations. You can easily assemble your EISENHORN fitness station yourself.
Included in the delivery are high-quality 2-component plugs that intelligently adapt to different wall materials. The plug consists of a robust nylon base body and uses the optimal anchoring principle depending on the type of wall.
Expansion in solid building materials (e.g. concrete)
Expanding in perforated building materials
Knotting in panel and lightweight construction materials (e.g. plasterboard, Fermacell)
)
Thanks to the innovative technology, the dowel offers a particularly high expansion volume, which ensures precise screwing and tightening torque. This guarantees a permanent, secure, and standard-compliant fastening - all without the need for special knowledge.
If you do not want to carry out the assembly yourself, we recommend hiring a qualified craftsman from your region.
Mounting on concrete walls - what you should consider
When drilling into concrete, fine drilling dust is created, which settles inside the hole. Since concrete is a dense, solid building material, you must completely remove this dust - only then can the anchor grip securely and firmly.
Vacuuming alone is not sufficient here. Ideally, you should clean the drill hole with compressed air or a blow pump before mounting the dowel. Alternatively, a simple straw can also be used to blow out the dust. Only a clean drill hole provides sufficient grip for the dowel and screw and prevents loosening.
Five attachment points for maximum stability
The pillar of your EISENHORN power station is attached to the wall with five screws distributed over the entire height. For this purpose, 8 mm dowels are used with a drilling depth of 80 mm - this ensures a secure anchoring with minimal impact on the wall structure.
Don't worry, the drill holes are small and can be easily closed again in case of moving or dismantling.
Additional security in uncertainty
You are not entirely sure how stable your lightweight wall really is? Especially with thinner or less load-bearing panels, we recommend you to play it safe. With toggle bolts and metric screw you can securely assemble your EISENHORN strenght station.
This ensures that your wall anchor is absolutely secure even with questionable wall materials.
Conclusion
A secure installation is the foundation for effective training with your EISENHORN Strenght Station - whether on concrete, bricks, aerated concrete, or lightweight walls. The robust aluminum column distributes the load reliably, and high-quality dowels intelligently adapt to any wall type. This ensures a permanently stable installation. If you are unsure, professional support from a craftsman is always a reliable solution.