Technology

Make sure that you screw the piston tightly into the clamping axle. For this purpose, the resistance level bolt must be aligned parallel during initial mounting. In the video you can see step by step how it is done.

For safe transportation, the parts are packed individually and well protected. Printed assembly instructions are included in the delivery. The following video shows the assembly steps in detail.

Did you tighten the axle on the piston to hold the piston’s own weight? This is important for safe operation. Tightening requires a relatively high torque. At best, you can extend the Allen key with the blocker.

Did you tighten the axle well at the horn? The horn must only have minimal lateral play. To achieve this, the two screws must be tightened strongly. So that the lateral play is almost eliminated and the horn can still…

Make sure you put the restraining rope over the axle point on the left and right. To do this, always fold the horn down into the parking position. This has two reasons: By the way, the rubber cord is designed…